§ 160-86. Minor subdivision plan.

The minor subdivision plan shall show or be accompanied by the following information:

A. 

Drafting standards.

(1) 

The plan shall be drawn at a scale of one inch equals 50 feet or one inch equals 100 feet or other standard engineering scale that provides greater detail.

(2) 

Dimensions shall be in feet and decimal parts thereof, and bearings in degrees, minutes and seconds.

(3) 

Preliminary plans shall be on standard engineering size sheets and prepared in a form that meets the requirements of the Recorder of Deeds.

B. 

Information to be shown (general).

(1) 

Name of the subdivision.

(2) 

Name and address of the owner.

(3) 

Name and address of the engineer or surveyor responsible for the plan.

(4) 

Zoning classification and requirements.

(5) 

Date, North point and scale.

(6) 

A location map for the purpose of locating the site at a scale of not less than 800 feet to the inch.

C. 

Existing features.

(1) 

Complete outline survey of the property to be subdivided, showing all courses, distances, area, and tie-ins to all adjacent street intersections.

(2) 

The location, names and widths of streets; the location of property lines and names of adjacent owners; the location of watercourses, sanitary sewers, storm drains, easements or rights-of-way, and similar features.

(3) 

The location and character of existing buildings, wooded areas, and other features.

D. 

Proposed layout.

(1) 

Proposed layout of lots.

(2) 

Lots numbered.

(3) 

Building setback lines.

(4) 

Total area and minimum lot size.

Amended 2-21-2006 by Ord. No. 375